Tenergy Universal smart Charger for NiMH/NiCD Battery Packs: 6v-12v

Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6v-12v.

Universal for any NiMH /NiCd battery packs 6V - 12V Fast charger with current switch to select either, 0.9A and 1.8A.

Delivers full charge within 1 - 2 hours.

Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh.

Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.

Smart Charger with automatic voltage detection.

Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.

Red LED will be on during charging.

Automatically charging ending with negative delta V. 4 hour safety timer: Charger will stop charging after 4 hours of operation.

Worldwide usage with 120-240V AC With Temperature sensor Safety protection fuse for over current, short circuit & reverse polarity protection.

Weight: 10.7 oz

Accessories Included

1 standard Tamiya connector.

1 connector adapter from standard Tamiya to Mini Tamiya.

1 set of alligator clip adapter with standard Tamiya connector on one end.

1 Temperature sensor Smart Charger

Specification

FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY

Input: AC100-240V Output: 6v-12V 0.9or1.8A

Operation Instruction Connect battery pack to output connector and plug AC power source.

Make sure battery polarity is connected correctly (Red wire is positive)

Charger will detect battery voltage automatically, Red LED will be on during charging.

When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on

Battery will be charged at 0.9A or 1.8A constant current

Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.

The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.

Don't charge battery packs with voltage less than 6V or voltage greater than 12V.

Battery pack must be made by high drain current cell.

Please contact your seller for instruction.

not responsible for any damage and consequent damage by Misusage.

Caution The charger is designed for indoor use only.

Don't leave the charger unattended during charging.

The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.

Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't try to disassemble the charger, High voltage inside, danger!